I have confirmed and shared the new TR-2516 constraints. Issue: Provision AHD, Hik TVI 4MP/5MP camera shown only 1280x1440 when connected to TR-2516. - Maximum resolution possible when the same camera is connected to the TR-1508. The issue is limited to 4M Half/5M Half mode due to TR-2516 chipset performance limit. TR-150x/TR-2504/TR-2508/TR-45xx have no chipset performance limitations. Example) 4M30 : (Recognized as 4M Half) 1280x1440 15ips 4M15 : 2560x1440 7ips 5M20 : (recognized as 5M Half) 1280x1920 10ips 5M12 : 2560x1920 7ips If IPS is set lower in AHD, TVI camera settings, TR-2516 will enable resolution rather than half mode. Third-party AHD (Provision) and TVI (Hik) cameras found on Onsite do not have 4M15ips and 5M12ips options. In this case, TR-2516 does not enable maximum camera resolution. - 5M 12.5ips is supported for IDIS TVI 5M models, so maximum resolution is available. Other models, TR-15xx, TR-2504/2508, and TR-4508/4516, do not have this constraint, so this is not a problem.

FAQs Archief | Page 2 of 33 | IDIS One Solution. One Company.

TR-2516 Constraints.

I have confirmed and shared the new TR-2516 constraints. Issue: Provision AHD, Hik TVI 4MP/5MP camera shown only 1280x1440 when connected to TR-2516. - Maximum resolution possible when the same camera is connected to the TR-1508. The issue is limited to 4M Half/5M Half mode due to TR-2516 chipset [...]

TR-2516 Constraints.Zehra Yildiz2025-03-10T14:35:08+00:00

I can’t see the Onvif protocol on the DR-1308P. Why is that?

DR-1000 series is a small form factor product and supports only IDIS cameras. Non-Onvif third-party cameras are not supported.

I can’t see the Onvif protocol on the DR-1308P. Why is that?Zehra Yildiz2025-03-10T14:33:35+00:00

What is the LAN/POE OUT port of DV-1304-A, and how do I use it? And what’s the connection to Power Sources?

An additional IP camera can be connected to the LAN/POE OUT PORT of DV-1304-A, and POE is provided. However, it is necessary to connect a DC 48V Adapter to use it. Refer to the following for details on the power supply. 0. 0. DV-1304-A can be powered w/ two [...]

What is the LAN/POE OUT port of DV-1304-A, and how do I use it? And what’s the connection to Power Sources?Zehra Yildiz2025-03-10T14:30:38+00:00

When Windows is reinstalled for Installation & ISS SW, Please tell me how to make the existing recorded data recognizable.

If you have backed-up ISS settings (*.iexp), importing them will enable existing data to be recognized. If you do not have an existing setup backup, the ISS Setup>Recording Service>Storage>Import function can retrieve the existing recording data and retrieve it as a deleted device.

When Windows is reinstalled for Installation & ISS SW, Please tell me how to make the existing recorded data recognizable.Zehra Yildiz2025-03-10T14:29:42+00:00

PSE(PoE) Power Constraints on DR-2500 NVR

Q : We found a possible issue with the PoE on this device. The problem happens when the IR lights come on in the cameras. There seems to be a PoE overload so one camera loses power. When we turn off the IR light on the bullet camera, then [...]

PSE(PoE) Power Constraints on DR-2500 NVRZehra Yildiz2025-03-10T14:28:51+00:00

How many cameras can be linked from the first one connected to the extender?

Officially, we can say 1 IPC linked from the camera. Power PoE, IEEE 802.3at(Class 4), 25.5W (DC OUT : 42.5-57V=, 0.3A MAX) DC OUT is extended port. 42.5V x 0.3A = 12.75W (min) 57V x 0.3A = 17.1W(Max) So, at least DC OUT (Extender port) can provide 12.75W~17.1W Basically, [...]

How many cameras can be linked from the first one connected to the extender?Zehra Yildiz2025-03-10T14:21:08+00:00

Tracking Cookies

Cookies van derden