What is the maximum number of Live tap on IDIS client software?
1. IDIS Center(64 Bit): 4 2. IDIS Soultion Suite(64 Bit): 6
How does rebuilding process of IR-300 work?
It is done automatically, when the faulty HDD is replaced. Please note that HDD bay should be the same and the replacement HDD should be compatible with IR-300
Correlation among Panic recording, Recording, HDD capacity
They have nothingto do with HDD capacity, Recording ratio, HDD overwrite. Recording priorities are related to recording quality. 1. Event when full-time recording : Event recording quality 2. Panic recording when full-time recording : Panic recording quality 3. Panic recording when event-recording : Panic recording quality 4. Event when Panic [...]
IDIS Fisheye camera projection methods
There are "Stereographic", "Equidistant", "Orthogonal" projections generally. IDIS Camera : 1. Panoramic Fisheye : Stereographic 2. Normal Lens : Equidstant -DC-Y1514W : Equidstant -DC-Y3C14WRX : Equidstant -NC-Y6513RX : Equidstant -NC-Y8C13WRX : Stereographic -DC-Y6C16WRX : Equidstant -DC-Y6516WRX : Equidstant
Why is the tilt angle narrower than visible angle ?
Here are two reasons : 1. To prevent diffuse reflection by top cover during night. 2. To prevent the top cover from entering the angle of view.
When using FEN, why is there a difference in speed between port forwarding and not?
If UDP is not available when accessing UDP, it will pass through 'Relay Server'. 'Relay Server' is in Korea and have capacity limitations, so, it lead to decline in speed. When using 'Port Forwarding', it doesn't pass through 'Relay Server' and directly connected between devices.(Speed Up) We recommend 'Port [...]
How is the Time information of video delivered?
The IDIS camera stores the time information ever frame when recording. If there is the time information delivered by RTSP, information is generated. However, if not, the time information is generated based on the time when the RTSP frame arrives at the Client.
For IDIS, why is the camera and NVR connected only 1:1?
It is premised to record when connecting the IDIS camera and NVR. Therefore, When registering a camera in NVR, use Record Session and Watch Session. Record Session allows only one connection. The IDIS camera has a buffer to respond to Jitter in the network, but, if more than two [...]
About Setup -> Display -> Main Monitor Sequence
1. Full Sequence mode : All Channels will be switched to selected division-screen. 2. Camera Sequence mode : The selected division-screen is the reference and only one screen at the bottom(the last ch) will be switched.
Is there any power-supply limitation to each port of recorder?
There are no limitations or differences in each port.